– 316 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
STATION AUTHORIZATION CODE/D
term
IP PASSWORD ASSIGNMENT/
WLAN STATION DIGEST AUTHENTICATION PASSWORD ASSIGNMENT
2B
FUNCTION:
This command is used to set up the Authorization Code per station for PAD Lock feature without using
AP00 card. Also used to set up the password sent to the IP network for the ID registration of the D
term
IP
and WLAN station digest authentication.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE
++ +
+
2BYY
2ND DATA
DE
1ST DATA
(1-8 digits) (1-8 digits)
++
DE
: Initial Data
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
00 Station Authori-
zation Code Set/
Display
X
XXXXXXXX
(Maximum 8
digits)
Station number X
XXXXXXXX
(Maximum 8
digits)
CCC
Authorization Code
X: 0-9, A (*), B (#)
Clear
D
term
IP registra-
tion password
for Protected
Login Mode
X
XXXXXXXX
(Maximum 8
digits)
NONE
Password
X: 0-9, A (*), B (#)
No data
CM08>513
CM15 Y=480
WLAN station
digest authenti-
cation password
X
XXXXXXXX
(Maximum 8
digits)
NONE
Password
X: 0-9, A (*), B (#)
No data
NOTE 1: When the initial data is set to “NONE”, the password is set to “0000”.
NOTE 2: After assign this command while SIP server is operating, be sure to report changing the SIP server
assigned by CM1D Y=33 second data “1”.
Continued on next page
~
~~~
DECEMBER/02/2005
CM2B
To Next Page
Loading...
