NEC UNIVERGE NEAX 2000 IPS - [Cmec] Maintenance by Mat;Cat

– 761 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
MAINTENANCE BY MAT/CAT
EC
FUNCTION:
This command is used for maintenance of the PBX. The functions of this command are outlined below:
• Battery release
• Line status display for single line telephone or D
term
• VMS Soft Key data download
• Office data copy for Backup CPU system
• System data backup/SDRAM data clear
• Office data copy from the Main site to Remote site
PRECAUTION:
(1) See Line Status Display/VMS Soft Key Data Download Status Display in the following pages for
details on how to read the status information.
(2) Line status display of a single line should not be performed while the single line is in use.
(3) Line status display is not available in off-line.
(4) VMS Soft Key data all clear must be executed in off-line.
ASSIGNMENT PROCEDURE:
ST EXE++ ++ECY
2ND DATA
DE
1ST DATA
(1-8 digits) (1-3 digits)
++ DE
CMEC