– 485 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
VIRTUAL LINE-VIRTUAL TRUNK PATH SETTING/ASSOCIATION OF
VIRTUAL PS STATION/WLAN VIRTUAL STATION NUMBER AND PS
STATION/WLAN STATION NUMBER
5A
FUNCTION:
Specify a path between the virtual line and virtual trunk for Wireless Communication System.
PRECAUTION:
The following data are set automatically by the virtual line-trunk path setting of CM5A Y=00.
If you clear CM5A Y=00 setting data, the following data are also cleared automatically.
(1) For Integrated/Adjunct CCIS
NOTE: The trunk route data must be assigned by CM35, because the trunk route data are not auto-
matically assigned.
The trunk route of the Virtual Trunk is 63 by the default data setting. If you want other use for
the trunk route 63, change the trunk route number of Virtual Trunk route by CM30 Y=00.
Continued on next page
INITIAL
COMMAND
CODE
MEANINGS 1ST DATA 2ND DATA MEANING
CM12 Y=00 DTMF/DP Virtual Station No. 1 DP
CM13 Y=18 Reverse signal sending to station Virtual Station No. 0 Send
CM30 Y=00 Trunk route allocation Virtual Trunk No. 63 NOTE Trunk Route No. 63
CM30 Y=02 Terminating system in Day Mode Virtual Trunk No. 04 DIT
CM30 Y=03 Terminating system in Night Mode Virtual Trunk No. 04 DIT
CM30 Y=04 Destination of DIT in Day Mode Virtual Trunk No. PS Station No. Station No. of DIT
destination
CM30 Y=05 Destination of DIT in Night Mode Virtual Trunk No. PS Station No. Station No. of DIT
destination
CM30 Y=40 Terminating system in Mode A Virtual Trunk No.
256-511
04 DIT
CM30 Y=41 Terminating system in Mode B Virtual Trunk No.
256-511
04 DIT
CM30 Y=42 Direct-In termination in Mode A Virtual Trunk No.
256-511
PS Station No. Station No. of DIT
destination
CM30 Y=43 Direct-In Termination in Mode B Virtual Trunk No.
256-511
PS Station No. Station No. of DIT
destination
CM12 Y=16 Trunk seized PS Station No. Virtual Trunk No. Trunk No.
JULY/01/2006
CM5A
To Next Page
Loading...
