NEC UNIVERGE NEAX 2000 IPS - Page 510

– 486 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
VIRTUAL LINE-VIRTUAL TRUNK PATH SETTING/ASSOCIATION OF
VIRTUAL PS STATION/WLAN VIRTUAL STATION NUMBER AND PS
STATION/WLAN STATION NUMBER
5A
(2) For Multi-site Roaming Visitor PS
[North America/Latin America]
NOTE 1: The trunk route data must be assigned by CM35, because the trunk route data are not auto-
matically assigned.
The trunk route of the Virtual Trunk is 63 by the default data setting. Be sure to assign the
separate trunk route number of Virtual Trunk for Home PS and Visitor PS by CM30 Y=00.
NOTE 2: The second data of CM30 Y=02, 03, 40, 41 are set to “4” (Direct-In Termination) automat-
ically by CM5A Y=00.
Be sure to change these data to “22” (Roaming Termination), for Roaming service.
INITIAL
COMMAND
CODE
MEANINGS 1ST DATA 2ND DATA MEANING
CM12 Y=00 DTMF/DP Virtual Station
No. assigned by
CM10/CM14
1DP
CM13 Y=18 Reverse signal sending to station Virtual Station
No. assigned by
CM10/CM14
0Send
CM30 Y=00 Trunk route allocation Virtual Trunk No.
256-511
63 NOTE 1 Trunk Route No. 63
CM30 Y=02 Terminating system in Day Mode Virtual Trunk No.
256-511
04 NOTE 2 Direct-In Termination
CM30 Y=03 Terminating system in Night Mode Virtual Trunk No.
256-511
04 NOTE 2 Direct-In Termination
CM30 Y=40 Terminating system in Mode A Virtual Trunk No.
256-511
04 NOTE 2 Direct-In Termination
CM30 Y=41 Terminating system in Mode B Virtual Trunk No.
256-511
04 NOTE 2 Direct-In Termination
JULY/01/2006
CM5A