CHAPTER 1 HOW TO USE CAT
– 14 – NWA-008844-001 Rev.5.0
91ch1001.fm
CAT MODE SETTING PROCEDURE
To set CAT mode:
1. Press 5. Press
– Conf lamp flashes
2. Press 6. Press
– Conf lamp flashes – Conf, Speaker, Answer lamp on
3. Press – “CAT MODE” displayed on LCD
– Conf lamp off 7. Press
4. Press – “COMMAND= –” displayed on LCD
NOTE: Step 1 through 6 need to be completed within 4 seconds.
To clear the CAT mode:
While “COMMAND= –” is displayed on the LCD.
1. Lift handset (Off Hook)
– Speaker lamp off.
2. Replace handset (On Hook)
– Conf, Answer lamps off.
– LCD returns to clock.
Transfer Conf
Conf
#
*
ST
Transfer
CAT MODE SETTING PROCEDURE
To Next Page
Loading...
