– 865 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR/MCI/PRINTER FOR PMS FUNCTIONS
DD01
FUNCTION:
This command is used to assign the Station Message Detail Recording (SMDR), Message Center Inter-
face (MCI) and Property Management System (PMS) functions when using PN-AP00-B/PN-AP00-D
with MRCA program.
[Series 3300]
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE++ +
+
DD01
2ND DATA
DE
1ST DATA
(3 digits) (1-2 digits)
++
DE
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
0
Preservation time for a billing memory of the totaled call
charge
[For EU]
[Series 3900]
0 : 32 days
1-255: 1-255 days
NOTE: When a station do not originate any call during the time set by this command, the totaled call
charge of the station is cleared.
2
Date to total the call charge
[For EU]
[Series 3900]
0 : End of month
1-25: The 1st-25th of the month
NOTE: From the 26th to the day before end of month can not be assigned.
3
Selection of memory area to printout the individual station
records
[For EU]
[Series 3900]
0 : Not available (No printout)
1 : Memory area of SMDR terminal 0
2 : Memory area of SMDR terminal 1
12 Room Status Code set by Check In operation
[Series 3900]
0: Not used
1:
8:
Continued on next page
Room Status Code
~
JUNE/01/2007
CMDD01
To Next Page
Loading...
