NEC UNIVERGE NEAX 2000 IPS - [Cmb0] Peg Count

– 654 – NWA-008844-001 Rev.5.0
91ch3007.fm
COMMAND CODE
TITLE:
PEG COUNT
B0
FUNCTION:
This command allows accumulated data of use for maintenance purposes to be read from the system
PEG counter. Data can be cleared after reading.
PRECAUTION:
When the system is reset, the contents in the memories of the PEG counter are all cleared.
ASSIGNMENT PROCEDURE:
Y=0
• To clear individual data
• To clear all PEG COUNT data
• To display
Y=2
• To set the PEG COUNT measurement start/end time
• To display the PEG COUNT measurement status
ST
EXE
++ ++
B00 CCC
DE
TRUNK STATUS DATA
(3-5 digits)
++
DE
ST
EXE
++ ++
B00 CCC
DE
++
DE
999
ST
++ +
B00
DE
TRUNK STATUS DATA
(3-5 digits)
+
DE
ST
EXE
++ ++
B02
DE
1ST DATA
(0/1)
++
DE
2ND DATA
(8 digits)
ST
+++
B02
DE
+
DE
2
CMB0