NEC UNIVERGE NEAX 2000 IPS - [Cmdd02] Maximum Number of Call Record Assignment

– 868 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
MAXIMUM NUMBER OF CALL RECORD ASSIGNMENT
DD02
FUNCTION:
This command is used to determine the maximum number of call records when using PN-AP00-B/PN-
AP00-D with MRCA program.
[Series 3300]
PRECAUTION:
(1) The amount of call record number set by CMDD02>0, 1, 2 must not exceed the following number.
(2) CMDD02>0, 1, 2 are effective after executing CMDD98. Before executing CMDD98, be sure to
print out all of the stored call records. CMDD98 deletes all of the stored call records.
ASSIGNMENT PROCEDURE:
Amount of Call Records number of CMDD02 1ST data 0, 1, 2
No EXPMEM on AP00 (PN-AP00-B) is provided
EXPMEM on AP00 (PN-AP00-B)/
AP00 (PN-AP00-D) is provided
CMDD00>3 is set to 0
(Local Office of
Centralized Billing-CCIS/
Stand-alone)
CMDD00>3 is set to 1
(Center Office of
Centralized Billing-CCIS)
CMDD00>3 is set to 0
(Local Office of
Centralized Billing-CCIS/
Stand-alone)
CMDD00>3 is set to 1
(Center Office of
Centralized Billing-CCIS)
2620 1310 23580 22270
ST
EXE
++ +
+
DD02
2ND DATA
DE
1ST DATA
(1 digit) (1-5 digits)
++
DE
JULY/01/2006
CMDD02