NEC UNIVERGE NEAX 2000 IPS - Example of Correcting the Data Entry

CHAPTER 1 HOW TO USE CAT
– 18 – NWA-008844-001 Rev.5.0
91ch1001.fm
(2) Example of correcting the data entry
In STEP 5 in the above (1) example, when has been pressed after entering “001” by mistake,
press . Then the state returns to STEP 4.
STEP1: CM10 has been entered and has been pressed.
STEP2: “001” has been entered instead of “000” as intended.
STEP3: “001” has been assigned as the first data after
pressing .
STEP4: If is pressed, the state returns to that of Step 1.
STEP5: Enter “000”.
STEP6: Press , and assign the correct first data.
If, in Step 11 in the above (1) example, when “302” has been entered instead of “301”, press .
Then the cursor moves to the position of “2”.
STEP1: In Step 11, enter “302” instead of “301” as intended.
STEP2: Press .
STEP3: Press digit Key “1”.
DE
CE
DE
10>
10>001
10>001: NONE
DE
CE
10>
10>000
DE
10>000: NONE
←
10>001: NONE-302
←
10>001: NONE-30
10>001: NONE-301
CAT OPERATION