CHAPTER 4 RESIDENT SYSTEM PROGRAM
– 887 – NWA-008844-001 Rev.5.0
91ch4001.fm
SERVICE CONDITIONS
(1) This service is applicable for equipment installed in PIM0 through PIM3.
(2) Data for any vacant slot is not assigned.
(3) Virtual stations are not assigned.
(4) A line/trunk card (PN-DK00/PN-CFTA/PN-CFTB/PN-2AMP/PN-4DAT/PN-4RSTF/PN-4RSTF-
A/PN-4RSTH/PN-4VCT/PN-16VCT/PN-32IPLA/PN-8IPLA) is not assigned, even if mounted.
(5) An application card is not assigned, even if mounted.
(6) No tenant assignment is provided.
(Tenant 01 is assigned)
(7) Details of Resident System Program
For the other commands which are not described in Programmed Data Table, the initial data are
loaded by the Resident System Program.
(8) Resident System Program cannot be used when providing a Remote PIM over IP feature.
JULY/01/2006
SERVICE CONDITIONS
To Next Page
Loading...
