NEC UNIVERGE NEAX 2000 IPS - [Cmdd04] Smdr Functions (2)

– 871 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR FUNCTIONS (2)
DD04
FUNCTION:
This command is used to assign the Station Message Detail Recording (SMDR) functions when using
PN-AP00-B/PN-AP00-D with MRCA program.
[Series 3300]
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE++ +
+
DD04
2ND DATA
DE
1ST DATA
(4 digits) (0/1)
++
DE
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
XX00 Send detail information of C.O./Tie Line outgoing calls to
SMDR terminal 0
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
0: Not sent
1: To send
XX01 Send detail information of outgoing calls excluding C.O./Tie
Line outgoing calls to SMDR terminal 0
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
[Series 3500]
0: Not sent
1: To send
XX02 Send detail information of C.O./Tie Line outgoing calls to
SMDR terminal 1
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
[Series 3500]
0: Not sent
1: To send
XX03 Send detail information of outgoing calls excluding C.O./Tie
Line outgoing calls to SMDR terminal 1
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
[Series 3500]
0: Not sent
1: To send
XX04 Send detail information of C.O./Tie Line outgoing calls to
SMDR for Centralized billing-CCIS
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
0: Not sent
1: To send
Continued on next page
JULY/01/2006
CMDD04