– 872 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR FUNCTIONS (2)
DD04
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
XX06 Send detail information of C.O./Tie Line incoming calls to
SMDR terminal 0
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
0: Not sent
1: To send
XX07 Send detail information of C.O./Tie Line incoming calls to
SMDR terminal 1
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
0: Not sent
1: To send
XX08 Send detail information of C.O./Tie Line incoming calls to
SMDR from local office of Centralized Billing
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
0: Not sent
1: To send
XX12 Send detail information of station-to-station calls to SMDR ter-
minal 0
XX: Service Class No. assigned by CM12 Y=45
[Series 3600]
0: Not sent
1: To send
XX13 Send detail information of station-to-station calls to SMDR ter-
minal 1
XX: Service Class No. assigned by CM12 Y=45
[Series 3600]
0: Not sent
1: To send
XX14 Send detail information of Immediate Printout Call Record for
the PMS
XX: Service Class No. assigned by CM12 Y=45
[Series 3700 R12.2]
0: Not sent
1: To send
XX16 Accumulate the call charge
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
[For EU]
[Series 3900]
0 : Not accumulated
1 : To accumulate
XX18 The operation set by CMDD31 is executed simultaneously when
Room Status Code is set/changed
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
[Series 3900]
0 : Not executed
1 : To execute
JUNE/01/2007
CMDD04
To Next Page
Loading...
