NEC UNIVERGE NEAX 2000 IPS - [Cm73] Memory Allocation for Speed Calling-Station (Station Speed Dialing)

– 524 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
MEMORY ALLOCATION FOR SPEED CALLING-STATION
(STATION SPEED DIALING)
73
FUNCTION:
This command is used to allocate memory areas for Speed Calling-Station (Station Speed Dialing) to
individual stations.
PRECAUTION:
The allowed number of 10-Slot Memory Blocks per station number ranges from 1 to 10.
ASSIGNMENT PROCEDURE:
DATA TABLE:
NOTE 1: 1000-Slot Memory Block number 4-9 (6000 Memory Parcels) cannot be used for Speed Di-
aling with Speed Calling-Station (Station Speed Dialing) keys provided by CM90 Y=00:
F11XX on a D
term
, and cannot also be used for Speed Calling-System (System Speed Dialing).
NOTE 2: If one of the 1000-Slot Memory Blocks is used for Speed Calling-System (indicated with
CM08>110, 111, 112, or 176), it cannot also be used for Speed Calling-Station (Station
Speed Dialing).
Continued on next page
ST
EXE
++ +
+
73
DATA
DE
STATION NUMBER
(1-8 digits) (6 digits)
++
DE
: Initial Data
STATION NUMBER SETTING DATA
X
XXXXXXXX
Station number
which performs
Speed Calling-Sta-
tion (Station Speed
Dialing)
W XX Y ZZ
NONE
W : 1000-Slot Memory Block number (0-9)
XX: 10-Slot Memory Start Block number (00-99)
Y : Facility for programming the dialed number from the sta-
tion (0/1=Allowed/Not allowed)
ZZ : Number of 10-Slot Memory Blocks (01-10)
NOTE 1, NOTE 2, NOTE 3
No data
~
NOVEMBER/15/2006
CM73