– 878 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
ROOM STATUS CODE
DD31
FUNCTION:
This command is used to assign the functions for each Room Status Code which is dialed from a guest
room or a Front Desk Terminal.
[Series 3900]
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE++ +
+
DD31
2ND DATA
DE
1ST DATA
(3 digits) (1 digit)
++
DE
: Initial Data
1ST DATA
(X: ROOM STATUS CODE 1-8)
2ND DATA
DATA FUNCTION
X00 Room Cutoff set/reset 0 : Not available
1: set
2: reset
X01 Do Not Disturb set/reset 0 : Not available
1: set
2: reset
X02 Wake Up Call reset 0 : Not available
1 : Available
X03 Message Waiting set/reset 0 : Not available
1: set
2: reset
X04 Check In Time clear 0 : Not deleted
1 : To delete
X05 Room Status Code dialed from guest room is allowed 0 : Not allowed
1 : Allow
Continued on next page
JUNE/01/2007
CMDD31
To Next Page
Loading...
