– 318 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK DATA
30
FUNCTION:
This command is used to assign characteristics to trunk lines which have been defined with CM10/
CM14, and Virtual IP trunk (Virtual IPT) lines which have been defined with CM14.
PRECAUTION:
Do not assign Trunk number 255 for CCIS/IP.
ASSIGNMENT PROCEDURE:
DATA TABLE:
DATA
+++ ++ +
ST
30YY
EXE
TRUNK
NUMBER
(000-255)
(1-8 digits)
DE DE
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00 Trunk route allocation 00
63
NONE
Trunk route number 00
Trunk route number 63
No data
CM35
CM14
01 Allocation of tenants to trunks 00
01
63
Tenant number 00
Tenant number 63
CM63 Y=0, 2
CM49
Y=01-07
CM51, CM65
Continued on next page
~
~
~
~
~
~
CM30
To Next Page
Loading...
