NEC UNIVERGE NEAX 2000 IPS - Page 343

– 319 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK DATA
30
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
02 Terminating system in Day Mode
for incoming C.O. calls
NOTE 1: When data 02, 03, 11
or 12 is assigned, set
CM30 Y=18 to 0.
NOTE 2: For DIDs and Tie
Lines, set CM30 Y=02
and CM30 Y=03 to 31.
02
03
04
08
09
10
11
12
13
14
16
18
21
22
31
Trunk Line (Direct) Appearance
Trunk Line (Direct) Appearance + TAS
Direct-In Termination
Dial-in
Automated Attendant
Attendant Console + TAS
Attendant Console + Trunk Line
(Direct) Appearance
Attendant Console + Trunk Line
(Direct) Appearance + TAS
TAS
Attendant Console
Remote Access to System (DISA)
ISDN Indial
Dial-in for WCS
Roaming Termination
[For PCS]
DID, Tie Line and the call which is not
handled by the PBX
CM30 Y=18
CM30 Y=04
CM49, CM64
03 Terminating system in Night
Mode for incoming C.O. calls
(See NOTE 1, NOTE 2 on
CM30 Y=02)
02
31
Same as CM30 Y=02
Continued on next page
~
CM30