– 443 – NWA-008844-001 Rev.5.0
91ch3004.fm
COMMAND CODE
TITLE:
ATT CALL ANSWER KEYS
46
FUNCTION:
This command is used to assign the functions to the call identification and answer keys on the large type
ATTCO N.
PRECAUTION:
(1) If no data is set, the key functions are automatically set by the initial data as shown below.
(2) If any standard key is changed, all keys must be re-programmed.
ASSIGNMENT PROCEDURE:
00 01 02 03 04 05
(SRL) (EMG) (ICPT) (NANS) (BUSY) (TIE)
06 07 08 09 10 11
(RCL) (ATND) (LDN)
LDN
ATND
RECALL
TIE
NANS
: C.O. INCOMING CALL
: OPERATOR CALL
: OPERATOR RECALL
: TIE LINE INCOMING CALL
: DO NOT ANSWER CALL
BUSY
ICPT
SRL
EMG
: BUSY LINE CALL
: INTERCEPT CALL
: SERIAL CALL
: OFF HOOK ALARM
+46+ +
KEY
++ +
NUMBER
DATA
(00-11)
EXEST DEDE
(2 digits)
CM46
To Next Page
Loading...
