– 530 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
STORED NUMBER FOR SPEED CALLING-STATION
(STATION SPEED DIALING)
74
: Initial Data
Y
1ST DATA 2ND DATA
DATA MEANING DATA MEANING
2 X YY Z X : 1000-Slot Memory Block
number (0-9)
YY: 10-Slot Memory Block
number (00-99)
Z : Memory Parcel number
(0-9)
XXX...X Station Name Character by MAT/
CAT (Maximum 16 characters)
XXX...X Calling Party Name Character
(Maximum 16 characters)
NONE No data
4 X YY Z X : 1000-Slot Memory Block
number (0, 3)
YY: 10-Slot Memory Block
number (00-99)
Z : Memory Parcel number
(0-9)
[Series 3600]
XXX…X Calling Party Name Character
Code (Maximum 32 digits: 16
characters) (for Russian)
See Character Code Table in
CM77.
NONE No data
5 X-XXXXXXXX X: Abbreviated Code (0-9)
[Series 3300]
X YY Z X : 1000-Slot Memory Block
Number (0-9)
YY: 10-Slot Memory Block Num-
ber (00-99)
X : Memory Parcel Number (0-9)
CCC Clear
NONE No data
NOTE 1: 4-digit (Fixed) abbreviated code is used for Series 3300 to 3500 software.
1-8-digit abbreviated code is used for Series 3600 software or later.
NOTE 2: Memory area of Speed Calling-System (System Speed Dialing) with 1-8-digit abbreviated code is also
used as the memory area of Speed Calling-Station (Station Speed Dialing). Do not assign the same
Memory Slot number of Speed Calling-System (System Speed Dialing) with 1-8-digit abbreviated code
(set by CM74 Y=0) and as Memory Slot number of Speed Calling-Station (Station Speed Dialing) (set
by CM73).
NOTE 3: Set the same number of digits as the digits of abbreviated code assigned by CM42 Y=77 to the first
data.
NOTE 4: When setting the number of digits for abbreviated code to 5-8, the minimum number of the abbreviated
code that can be registered to the memory area is as follows.
• 5-digit abbreviated code: 500
• 6-digit abbreviated code: 333
• 7-digit abbreviated code: 250
• 8-digit abbreviated code: 200
JULY/01/2006
CM74
To Next Page
Loading...
