– 860 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
BILLING MEMORY CLEAR FOR PN-AP00-B WITH
AP00 PROGRAM
D102
(2) “DATA ERROR” is indicated when CMD102>000: CCC is entered in the following cases.
• The sum of all call records numbers set by CMD003>23, 24, 25, 26, 28, 29, 30 exceeds the amount
of call records number mentioned in NOTE below.
• System data all clear by CMD101 is not executed.
ASSIGNMENT PROCEDURE:
NOTE: By entering the 1st data “0000”, the status of the Expansion Memory card (PZ-M537) will
be displayed as shown below.
AP OFF LINE
ST
EXE
++ ++
D102 CCC
DE
0000
++
DE
(4 digits)
Amount of Call Records number of CMD003 1ST data 23, 24, 25, 26, 28, 29, 30
No EXPMEM on AP00 is provided EXPMEM on AP00 is provided
When CMD001>179
is set to 0
(Local Office of
Centralized Billing-CCIS/
Stand-alone)
When CMD001>179
is set to 1
(Center Office of
Centralized Billing-CCIS)
When CMD001>179
is set to 0
(Local Office of
Centralized Billing-CCIS/
Stand-alone)
When CMD001>179
is set to 1
(Center Office of
Centralized Billing-CCIS)
1600 800 27000: When CMD003>28 is set to 0
(Call Record for CIS is not provided)
26000: When CMD003>28 is set to other than 0
(Call Record for CIS is provided)
CMD102
To Next Page
Loading...
