– 862 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR FUNCTIONS (1)/DO NOT DISTURB GROUP SET/CANCEL
DD00
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
7 Action when the memory in local office of Centralized Billing-
CCIS for SMDR has overflowed
0 : New data is stored by deleting the
oldest data
1 : No new data is stored
11 Send detail information on abandoned incoming call to SMDR
terminal 0
[Series 3500]
0: Not sent
1: To send
12 Send detail information on abandoned incoming call to SMDR
terminal 1
[Series 3500]
0: Not sent
1: To send
14 Metering pulse or charging rate sent to SMDR
[Series 3500]
0 : Metering Pulse
1 : Charging Rate
16 Method of call charge for ISDN calls
[For EU]
[Series 3900]
0 : MP Built-in charge
1 : Information from ISDN network
20 Do Not Disturb group set/cancel 0 : Not provided
1 : To provide
21 Whether the printing of Do Not Disturb set/cancel from a indi-
vidual station
[Series 3600]
0 : Available
1 : Not available
22 Whether the printing of Do Not Disturb for a individual station
set/cancel from a Front console/Hotel console/DSS console/
PMS/Attendant console
[Series 3600]
0 : Available
1 : Not available
23 Whether the printing of Room Cutoff for a individual station set/
cancel from a Front console/Hotel console/DSS console/PMS/
Attendant console
[Series 3600]
0 : Available
1 : Not available
24 Whether the printing of Message Waiting set/cancel from a Front
console/Hotel console/DSS console/PMS/Attendant console
[Series 3600]
0 : Available
1 : Not available
Continued on next page
JUNE/01/2007
CMDD00
To Next Page
Loading...
