– 863 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR FUNCTIONS (1)/DO NOT DISTURB GROUP SET/CANCEL
DD00
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
25 Whether the printing of Automatic Wake Up set/cancel from a
individual station
[Series 3600]
0 : Available
1 : Not available
26 Whether the printing of Automatic Wake Up for a individual sta-
tion set/cancel from a Front console/Hotel console/DSS console/
PMS/Attendant console
[Series 3600]
0 : Available
1 : Not available
27 Whether the printing of Automatic Wake Up for a individual sta-
tion execution
[Series 3600]
0 : Available
1 : Not available
28 Printing way of Automatic Wake Up for a individual station exe-
cution
[Series 3600]
0 : To print only result
1 : To print process and result
NOTE: When the second data is set to 1, the record of the start of calling/the called station is busy/re-call-
ing is also printed.
33 Whether the printing of Check In/Check In cancel, Check Out/
Check Out cancel
[Series 3600]
0 : Available
1 : Not available
34 Whether the printing when the PMS is connected/disconnected
to/from the system
[Series 3600]
0 : Available
1 : Not available
35 Whether the printing of Room Status Code Record
[Series 3700 R12.2]
0 : Available
1 : Not available
36 Printing way of Immediate Printout Call Record
[Series 3700 R12.2]
0 : Call charge by MP built-in SMDR
1 : ISDN call charge information
37 Whether the printing of Account Code (ACC)/Authorization
Code
[Series 3700 R12.2]
0 : Not available
1 : Available
126 Control of External alarm relay (DK) when the accumulation
rate of billing memory exceeds the value set by CMDD01>229
See CMDD01>229
0 : Relay ON/OFF
(every 0.5 seconds)
1: Relay ON
Continued on next page
JUNE/01/2007
CMDD00
To Next Page
Loading...
