EasyManua.ls Logo

NEC UNIVERGE NEAX 2000 IPS - Page 646

NEC UNIVERGE NEAX 2000 IPS
1038 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 622 – NWA-008844-001 Rev.5.0
91ch3007.fm
COMMAND CODE
TITLE:
CCIS CHANNEL DATA/IP TRUNK DATA/SIP TRUNK DATA
A7
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
62 Payload size for IP trunk 0
1
2
3
10 ms.
20 ms.
30 ms.
40 ms.
NOTE 1: Set the payload size according to the maximum voice channels per IPT card as follows.
NOTE 2: When G.723.1 is applied for voice encoding, 30 ms. is set regardless of this data setting.
NOTE 3: When the payload size setting differs from that for the opposite IP trunk, the shorter size than the
other is adopted.
63 Other destination CCH (Common
Channel Handler) number when all
voice channels of a destination IP
trunk are busy
[Series 3200 R6.2 (R6.2)]
0
7
NONE
CCH number
No data
CMA7 Y=64
CM08>614
CMA8
64 IP trunk/SIP seizure sequence
[Series 3200 R6.2 (R6.2)]
0
1
By allotter
Lowest VCT circuit number
CMA7 Y=63
70 H.323/SIP LAN Interface number
for control packet
00
15
NONE
LAN Interface number
No data
71 H.323/SIP Profile number for con-
trol packet
00
31
NONE
Profile number for control packet
No data
CMBA
IPT INITIAL
PAYLOAD SIZE
MAXIMUM VOICE CHANNELS PER IPT
G.729a G.711 G.723. 1
10 ms. 4 4
20 ms. 8 8
30 ms. 16 16 16
40 ms. 16 16
~ ~ ~
DECEMBER/02/2005
CMA7

Table of Contents

Other manuals for NEC UNIVERGE NEAX 2000 IPS

Related product manuals