– 116 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
BASIC SERVICE FEATURE: 400-493
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
400 Send Calling Party Subaddress to ISDN network 0
1
To send
Not sent
401 Terminating system for Called Party Subaddress 0
1
Station call
Terminating system assigned by
CM30 Y=02/03/40/41
402 Advice of Charge (AOC) display on D
term
when the charge has
been summed over $9999.99/€655.35 (After 6 seconds, the dis-
play goes off.)
[Australia/France/Germany/Netherlands/Italy/Greece/
Luxembourg/Portugal/Spain/Sweden]
0
1
Flashing display
Fixed display
403 Timing start when making ISDN call from attendant 0
1
Not available
Available
404 Advice of Charge
[Australia/France/Germany/Netherlands/Italy/Greece/
Luxembourg/Portugal/Spain/Sweden]
0
1
Not available
Available
405 Consecutive Speed Dialing when making ISDN call 0
1
Available
Not available
407 Busy tone is sent to calling party of ISDN when called party is
busy in tandem connection (ISDN to COT)
0
1
Available (BT)
Not available (RBT)
420 Frequency of metering pulse for COT
[Australia Only]
0
1
16 kHz
50 Hz/12 kHz
421 Transmission level for DIT
[Brazil (900 Ω)/New Zealand]
0
1
For Brazil/New Zealand
For other than Brazil/New Zealand
422 D
term
speaker volume control (6dB gain) in on-hook speaker
mode
[Australia Only]
0
1
Available
Not available
424 Method of charging a transferred call 0
1
Charging to transferring station or
transfer destination station
Split charging to both transferring sta-
tion and transfer destination station
Continued on next page
INITIAL
JULY/01/2006
CM08
To Next Page
Loading...
