– 153 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
LAN INTERFACE ASSIGNMENT
0A
IPT INITIAL
IP-PAD INITIAL
SIP INITIAL
: Initial Data
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
85 Baud of FAX communica-
tion to the LAN Interface of
the IP-PAD card
[Series 3200 R6.2
(R6.2)]
00
31
LAN Interface
number
0
1
2
3
4
5
NONE
2400 bps
4800 bps
7200 bps
9600 bps
12000 bps
14400 bps
14400 bps
92 RTCP sending timer for SIP
trunk
[Series 3800]
00
31
LAN Interface
number
000
001
004
005
120
CCC
NONE
Not provided
5 seconds
5 seconds
120 seconds
Clear
Not provided
NOTE: We recommend setting the RTCP sending timer 5 seconds to enable RTCP function if there is no system
administrator specification.
93 RTCP sending pattern for
SIP trunk
[Series 3800]
00
31
LAN Interface
number
0
1
Random
Fixed
NOTE 1: Although this command is set, RTCP sending is not performed when CM0A Y=92 is set to 000 or
NONE.
NOTE 2: Although CM0A Y=92 is set, RTCP sending is performed with Random timer in the 5 to 30 seconds
range (500 ms. increments) when the second data is set to 0.
NOTE 3: RTCP sending is performed following the setting of CM0A Y=92 when the second data is set to 1
(Fixed).
Continued on next page
~ ~
~~
~
~
NOVEMBER/15/2006
CM0A
To Next Page
Loading...
