– 161 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
LAN DATA ASSIGNMENT
0B
INITIAL
: Initial Data
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
03 Simple Network Manage-
ment Protocol (SNMP) data
setting
00 SNMP port
[Series 3100]
0
1
Open SNMP port
Not open SNMP port
01 Community
Name “admin”
[Series 3100]
0
1
Allow (admin)
Restrict (public)
NOTE: Restrict the use of community name “admin” (set the community name to “public”) except the system
construction.
Simple Network Manage-
ment Protocol (SNMP) data
setting
02 Trap is sent to the
SNMP manager
[Series 3200
R6.2 (R6.2)]
0
1
To send
Not sent
03
Definition of the IP
address for the
SNMP manager
[Series 3300]
0
1
Subnet Mask of the IP address for
the SNMP manager (First place)
IP address for the SNMP manager
(Fourth place)
04 Kind of Trap
message (Spe-
cific, Object ID)
sent to SNMP
manager
[Australia
Only]
[Series 3600]
0
1
Variable Trap message by exter-
nal alarm kind (MJ/MN/--)
Fixed Trap message
10 Community
name (1/2)
(1-16 characters)
[Series 3200
R6.2 (R6.2)]
XX...X
NONE
Character Code by MAT/CAT
(Maximum 32 digits: 16 charac-
ters)
No data
See Character Code Table in
CM77.
Continued on next page
JULY/01/2006
CM0B
To Next Page
Loading...
