NEC UNIVERGE NEAX 2000 IPS - Page 206

– 182 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
UPDATING OF D
term
IP FIRMWARE/MP PROGRAM DOWNLOAD
(FTP)
0C
: Initial Data
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
10 MP Program Down-
load (FTP) informa-
tion (Main Site)
[Series 3500]
00 IP Address for
FTP server
000000000000
255255255255
CCC
NONE
IP Address for the FTP server
Clear
No data
01 Port number for
FTP server
00001
65534
CCC
NONE
TCP Port No. for the FTP server
Clear
TCP Port No. 21
NOTE: Port No. 21 is used for the file transfer (control), and Port No. 20 is used for the
file transfer in initial data setting.
For example, when the second data is set to 3000, Port No. 3000 is used for the file
transfer (control), and Port No. 20 is used for the file transfer.
02 User ID for FTP
server
X
XXXXXXXX
CCC
NONE
User ID (Maximum 8 characters)
X: A-Z, 0-9
Clear
No data
NOTE: When no user ID is assigned, log into the FTP server with “anonymous”.
03 Password for FTP
server
X
XXXXXXXX
CCC
NONE
Password (Maximum 8 characters)
X: A-Z, 0-9
Clear
No data
NOTE: While entering the password with CAT “*” (asterisk) is displayed on LCD. When
entering the password with the MOC screen, actual data is displayed.
Continued on next page
~ ~ ~ ~
JULY/01/2006
CM0C