– 205 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER
10
LEN Assignment on Each Line/Trunk Card
NOTE 1: For PN-2AMPA card, the card number must be assigned to all two Levels, which are the first
LEN (Level 0) and third LEN (Level 2), regardless of the number of used circuit.
NOTE 2: For PN-4CSI card, the CS/ZT number must be assigned to the first LEN (level 0) and third
LEN (level 2) of the PN-4CSI card mounting slot and the adjoining right side slot.
NOTE 3: For PN-4DLCM/PN-4DLCQ card, station number/ATTCON number must be assigned to
each LEN of all four Levels, regardless of the number of used circuit.
×: Available –: Not available
CARD
NAME
LEN TO BE ASSIGNED ON EACH LTXX
NUMBER
OF
CIRCUITS
NUMBER
OF TIME
SLOTS
LEVEL
0
LEVEL
1
LEVEL
2
LEVEL
3
LEVEL
4
LEVEL
5
LEVEL
6
LEVEL
7
PN-2LDT ××–––––– 2 2
PN-4LLCB ××××–––– 4 4
PN-2ODT ××–––––– 2 2
PN-4ODT ××××–––– 4 4
PN-8RST × – × ––––– 8 8
PN-4RSTF × ––––––– 4 4
PN-4RSTH × ––––––– 4 4
PN-TNT × – × ––––– 2 4
PN-4VCT ××××–––– 1 –
PZ-VM00
(with VM01)
××××(×)(×)(×)(×)1 4
(8)
PZ-VM02 ××××–––– 1 4
PZ-VM03-M
(with VM04/
VM05/VM06)
××××(×)(×)(×)(×)1 4
(16)
PZ-VM10-M
(with VM01)
××××(×)(×)(×)(×)1 4
(8)
JULY/01/2006
CM10
To Next Page
Loading...
