– 248 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER FOR EACH FP
14
1ST DATA 2ND DATA
RELATED
COMMAND
DATA MEANING DATA MEANING
XX ZZZ XX : FP/Virtual AP No.
(00-63)
ZZZ: AP/Virtual PIM
Port No. (000-127)
EEB XXX Virtual CS/ZT Registration for WLAN
XXX represents Virtual CS/ZT number (000-
255)
NOTE 1: For the port number of Virtual CSH
set by 1st data, you can set only the
port number that is a multiple of 4
(000, 004, 008, ...056, 060).
NOTE 2: The total number of ports of Virtual
CSH and other ports used by the
system (PIM port/Virtual PIM port)
must not exceed 512 ports.
NOTE 3: Do not duplicate the CS/ZT number
set by CM14>EEBXXX and the CS/
ZT number set by CM14>EE3XXX/
CM14>EEAXXX.
NOTE 4: When more than one Virtual CS/ZT
is registered for one Virtual CSH,
accommodating ports have to be
assigned sequentially, beginning
with the lowest port number.
NOTE 5: When 16 or less Virtual CSs/ZTs
are registered for one SIP Server,
they have to be registered with one
Virtual CSH.
When 17 or more Virtual CSs/ZTs
are registered, they have to be reg-
istered sequentially beginning with
the Virtual CSH that is assigned to
the lowest control block number by
CMBC Y=02.
NOTE 6: Maximum 20 Virtual CSs/ZTs can
be registered per SIP Server.
[Series 3600]
CM05
Y=0/6
CMBC
Y=02
Continued on next page
INITIAL
DECEMBER/02/2005
CM14
To Next Page
Loading...
