– 256 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS A
15
Service Restriction Class A
: Initial Data
Continued on next page
Y SERVICE
REST.
CLASS (A)
SETTING DATA
No. MEANING DATA MEANING
136 Calling Number/Calling Name Display for ISDN/T1-ANI/
MFC-R2 incoming call
00
15
0
1
Calling Number
Display
Calling Name Display
139 Short Message Notification (OAI)
[For PCS]
0
1
Allow
Restricted
140 Pad Lock Set/Reset from station 0
1
Allow
Restricted
141 Station Authorization Code Set/Change 0
1
Restricted
Allow
143 D
term
IP Logout operation 0
1
Allow
Restricted
146 Sending Switch Hook Flash for Adjunct Analog System
[Series 3100]
0
1
Allow
Restricted
147 Voice Mail Private Password-CCIS 0
1
Allow
Restricted
NOTE: The first data must be the preassigned VMS Service Restriction Class which is sent from the office via
CCIS.
This command is not effective for the Service Restriction Class of own office.
148 PS Location Indication
[Series 3100]
00
15
0
1
Restricted
Allow
149 PS Location Indication on D
term
display
[Series 3100]
0
1
Allow
Restricted
204 Call Forwarding-PS/WLAN Terminal Out of Cell (Zone) for
PS/WLAN Terminal Soft Key
[Series 3500]
0
1
Destination setting of
each PS/WLAN termi-
nal
Destination setting of
each tenant
~ ~
JULY/01/2006
CM15
To Next Page
Loading...
