– 258 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS A
15
Service Restriction Class A
: Initial Data
Y SERVICE
REST.
CLASS (A)
SETTING DATA
No. MEANING DATA MEANING
219 Call Forwarding-Busy Line for call forwarding in Mobility
Access Mode
[Series 3700 R12.2]
00
15
0
1
Restricted
Allow
222 Room Status Code setting
(Room Cutoff/Do Not Disturb/Message Waiting/Wake Up
Call/Trunk Restriction class change)
[Series 3900]
0
1
Allowed
Restricted
400 Displaying pattern of Caller ID on the LCD of D
term
before
answering or after answering a trunk call
[Series 3800]
0
1
7
To display calling
number on upper line
of LCD, calling name
on middle line of LCD
To display calling
name on upper line of
LCD, calling number
on middle line of LCD
Not displayed calling
number and calling
name simultaneously
NOTE 1: When the second data of CM15 Y=400 is set to 0, set the second data of CM15 Y=136 to 1 (Calling
Name Display).
NOTE 2: When the second data of CM15 Y=400 is set to 1, set the second data of CM15 Y=136 to 0 (Calling
Number Display).
401 Entry of Authorization Code/Forced Account Code after dial-
ing an LCR access code and desired number
[Series 3900]
00
15
0
1
2
7
Allow (Authorization
Code)
Allow (Forced
Account Code)
Allow (Authorization
Code [PAD LOCK])
Restricted
NOTE: To provide this operation, the following data assignments are required.
- Toll restriction
(CM12 Y=01, CM8A Y=5XXX: 000, CM81)
- LCR origination
(CM20: A126/A127/A128/A129, CM8A Y=5XXX: 180, CM85)
~ ~
JUNE/01/2007
CM15
To Next Page
Loading...
