– 274 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION HUNTING GROUP
18
DATA TABLE:
(1) Station Hunting-Terminal
: Initial Data
Y STATION NUMBER (A) SETTING DATA
No. MEANING DATA MEANING DATA MEANING
0 Station numbers
included in Station
Hunting group
X
XXXXXXXX
Station number (A) X
XXXXXXXX
NONE
Station number (B)
No data
When assigning station numbers to a Station Hunting group, only two station numbers
can be assigned per operation. By repeating the operation as often as required, all the sta-
tion numbers to be included in a Station Hunting Group can be assigned. The two station
numbers to be assigned with one operation are defined as Station Number (A) and Station
Number (B).
Example: When you define a Station Hunting-Terminal group using Station Numbers
300, 301, and 302, designate 300 as the pilot station number, and perform the
following two operations:
Station No. (A)
Station No. (B)
1st Operation 300 301
2nd Operation 301 302
As seen above, one station can be either Station Number (A) or Station Number (B). Sta-
tion Number (A)/(B) is used to identify which of the two station numbers is to be
assigned first.
1 Kind of station
numbers included in
Station Hunting group
X
XXXXXXXX
Station number 0
1
Member station of Station
Hunting-Terminal
Pilot station of Station
Hunting-Terminal
Continued on next page
~
~
~
CM18
To Next Page
Loading...
