– 289 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
NUMBERING PLAN/SINGLE DIGIT FEATURE ACCESS CODE
(PROGRAMMABLE)
20
(3) Name Display Registration From D
term
is as follows.
• You can configure the station number from the D
term
to which the station number belongs.
• Register the characters from MAT/CAT to SLT, D
term
without LCD and Trunk.
• The characters are specified by the number of pressing the keys (0-9, *, #).
•Refer to “Character Table” on next page.
Example: To register “A”, press key twice.
By pressing same key 11 times, the character returns to the one pressed once.
• To register characters, press key after each character registration.
• To switch between alphabet upper case (A-Z) and alphabet lower case (a-z), press key.
• To delete the data, overwrite by blank.
• The following is the example to register “john”:
(1) (DT receiving)
(2) Register the access code specified for Name Display
(SPDT receiving).
(3)
(4)
(5)
(6)
(7)
Continued on next page
2
Hold
Recall
j
o
h
n
LNR/SPD
5 5 Hold
6 6 6 6 Hold
4 4 4 Hold
6 6 6 Hold
LNR/SPD
JANUARY/20/2006
CM20
To Next Page
Loading...
