NEC UNIVERGE NEAX 2000 IPS - Page 392

– 368 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
173 Call Forwarding-All Calls
on Attendant Overflow
0
1
Available
Not available
CM51 Y=31
174 CID Call Routing for non-
DID on ISDN, Caller ID
0
1
2
3
To provide (Using Development Pattern 0)
To provide (Using Development Pattern 1)
To provide (Using Development Pattern 2)
Not provided
CM2A Y=50-52
186 Alternate Routing for IPT/
SIP
0
1
To provide
Not provided
CM8A
CM35 Y=192
187 Alternate Routing for ISDN
[Australia Only]
0
1
To provide
Not provided
CM8A
189 Trunk access code for Trunk-
Direct Appearances Multi-
line Operation
[Series 3800]
X
XX
NONE
Trunk Access Code to be added
X=0-9, A (*), B (#)
No data
CM35 Y=44
192 Tandem calls to CCT/IPT/
Virtual IPT/SIP with Alter-
nate Routing for a fault
occurrence
[Series 3200 R6.2 (R6.2)]
0
1
To provide
Not provided
CM35 Y=186
193 Characteristic level
[Series 3200 R6.1 (R6.1)]
10-17
NONE
Characteristic level No. 10-17
No data
CM0A Y=72
196 Q-SIG Facility
[Series 3200 R6.2 (R6.2)]
00
15
Q-SIG
No data
CM35 Y=90: 0
NOTE: This command is effective when CM35 Y=90: 0 (No. 7 CCIS).
197 Object ID assignment of
Q-SIG Facility Information
Element
[Series 3300]
0
1
Global
Local
Continued on next page
~
NOVEMBER/15/2006
CM35