NEC UNIVERGE NEAX 2000 IPS - Page 494

– 470 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
AUTOMATIC TRANSFER DESTINATIONS
51
: Initial Data
Y GROUP NUMBER SETTING DATA
No.
MEANING
DATA MEANING DATA MEANING
08 Same as CM51 Y=06 (for station call) 00
63
Tenant 00
Tenant 63
E000
or
EB000
EB127
NONE
Attendant Console
Digital Announce-
ment Trunk No.
assigned by
CM10/CM14
No data
09 Transfer destination of incoming call when a
called station is set to Call Forwarding-Busy
Line/Don’t Answer (No Answer) and the des-
tination of forwarded call is set to the Atten-
dant Console Night Mode is set (for DID/Tie
Line call)
[Series 3600]
X
XXXXXXXX
NONE
Station No.
No data
NOTE: In the following cases, the transfer destination can be also assigned by CM51 Y=09.
- Transferring a DID/Tie Line call when Do Not Disturb is set to the called station
[Series 3600]
- Transferring a station call/Priority Call to Attendant Position Night Mode is set
[Series 3700 R12.1]
- Transferring DID/Tie Line/station call when the called station is set to Call Forwarding-Busy Line/
Don’t Answer (No Answer) and the destination of forwarded call is set to the Attendant Position Night
Mode is set
[Series 3700 R12.1]
10 Transfer destination of incoming call when Do
Not Disturb is set to the called station (for sta-
tion call)
00
63
Tenant 00
Tenant 63
X
XXXXXXXX
E000
NONE
Station No.
Attendant Console
No data
NOTE: For DID/Tie Line call, the transfer destination can be assigned by CM51 Y=09.
[Series 3600]
Continued on next page
~ ~
~ ~
~ ~ ~
JUNE/01/2007
CM51