NEC UNIVERGE NEAX 2000 IPS - Page 539

– 515 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
LOCATION DATA ASSIGNMENT
67
: Initial Data
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
21
22
23
24
Programmable list
4
Programmable list
5
Programmable list
6
Programmable list
7
[Series 3200
R6.2 (R6.2)]
00 FAX Protocol Pat-
tern No.
00
01
02
03
04
NONE
Not detect the FAX pro-
tocol NOTE
G.711 µ-law
(Only for PN-8IPLA)
G.711 A-law
(Only for PN-8IPLA)
G.726
T.30
(Only for PN-32IPLA-A)
No data
NOTE: To avoid the misdetection, set the second data to 00 when the location groups
(between location groups) do not provide FAX over IP feature.
01 FAX Payload Size
Pattern No.
01
04
NONE
10 ms.
40 ms.
(10 ms. increments)
No data
NOTE: When using the PN-8IPLA (IP-PAD) card, set the second data in the range of 01-
04 (10 ms. to 40 ms.).
08 Minimum value of
jitter buffer
01
30
NONE
10 ms.
300 ms.
(10 ms. increments)
No data
CM67 Y=21/22/
23/24>09
NOTE: Assign the value which does not exceed the maximum value of jitter buffer set by
CM67 Y=21/22/23/24>09.
Continued on next page
~ ~
~
~
JULY/01/2006
CM67