NEC UNIVERGE NEAX 2000 IPS - Page 542

– 518 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
LOCATION DATA ASSIGNMENT
67
Y=90-92
: Initial Data
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
90 Limit bandwidth
between location
groups
[Series 3100]
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
00000
65534
NONE
CCC
0 Kbps
65534 Kbps
100000 Kbps (100 Mbps)
Clear
CM12 Y=39/50
CM8A
Y=5000-5255:
173
CM0A Y=09
CM67 Y=92
CMAD Y=29
NOTE 1: Assign the value which exceeds the warning bandwidth set by CM67 Y=92.
NOTE 2: Set the bandwidth for voice packet. The available bandwidth minus the bandwidth for control packet
(40 Kbps) is the bandwidth for voice packet.
If the reflection speed of terminals such as button reflection becomes slower by setting the value above
mentioned, set the bandwidth for voice packet to value which the bandwidth for control packet sup-
posed more than 40 Kbps.
91 Action when the
traffic between
location groups
exceeds the limit
bandwidth
[Series 3100]
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
0
3
Restrict the connection
between location groups
Keep the connection
between location groups
CM12 Y=39/50
CM67 Y=90
CM8A Y=5000-
5255: 173
CM0A Y=09
CMAD Y=29
92 Warning band-
width between
location groups
[Series 3100]
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
00000
65534
NONE
CCC
0 Kbps
65534 Kbps
100000 Kbps (100 Mbps)
Clear
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM0A Y=09
CM67 Y=90
CMAD Y=29
NOTE: Assign the value which does not exceed the limit bandwidth set by CM67 Y=90.
~ ~
~ ~
JULY/01/2006
CM67