NEC UNIVERGE NEAX 2000 IPS - Page 550

– 526 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
MEMORY ALLOCATION FOR SPEED CALLING-STATION
(STATION SPEED DIALING)
73
Example: If the quantity of Speed Calling (Speed Dial) numbers is 10 for Station Number 300, 20 for
Station Number 301, and 30 for Station Number 302, the memory areas assignment is as fol-
lows.
Memory Start Block
Station 1000-Slot Memory Number (10-Slot Number of 10-Slot
Number Block Number Memory Block) Memory Block
300 0 00 01
301 0 01 02
302 0 03 03
303 0 06 01
The abbreviated codes for Speed Calling-Station (Station Speed Dialing) are automatically deter-
mined by assigning this command on a station basis.
If the quantity of Memory Parcels per station (or per station group) does not exceed 10, then Ab-
breviated Code=0-X.
If the quantity of Memory Parcels per station (or per station group) exceeds 11, then Abbreviated
Code=00-XX.
The following figure shows the relationship between Abbreviated Codes and Memory Parcels.
Continued on next page
In the case of 10 Memory Parcels
Memory
Parcel
Number
0
~
1
2
3
4
5
9
10-Slot
Memory Block
0
~
1
2
3
4
5
9
(Abbreviated
Code)
Memory
Parcel
Number
(Abbreviated
Code)
In the case of 20 Memory Parcels
0
~
1
9
0
1
9
10-Slot
Memory Block
00
~
01
09
10
11
19
~
10-Slot
Memory Block
~
CM73