– 618 – NWA-008844-001 Rev.5.0
91ch3007.fm
COMMAND CODE
TITLE:
CCIS CHANNEL DATA/IP TRUNK DATA/SIP TRUNK DATA
A7
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
50 DS code point (DiffServ code) set-
ting for IP trunk control packet
00-3F
NONE
DS code point
No data
CM35 Y=161
CMA7 Y=44
NOTE 1: Set this data when the router provides DiffServ QoS, if required.
DiffServ: Differentiated Services; one type of QoS.
QoS : Quality of Service
NOTE 2: When this data is set, the TOS field Precedence set by CMA7 Y=44 is ineffective.
If you want to validate the Precedence set by CMA7 Y=44, set “CCC” (data clear) for CMA7
Y=50.
NOTE 3: This data setting is required only for Point-to-Multipoint connection.
52 Maximum threshold of packet dis-
card probability for IP trunk
001
100
NONE
1 %
(1 % increments)
100 %
10 %
53 Maximum value of jitter buffer for
IP trunk
001
060
NONE
1 ms.
(10 ms. increments)
600 ms.
300 ms.
NOTE: Assign the value which exceeds the minimum value for jitter buffer set by CMA7 Y=54.
54 Minimum value of jitter buffer for
IP trunk
001
060
NONE
10 ms.
(10 ms. increments)
600 ms.
40 ms.
NOTE 1: This data is used for the default delay for voice packet.
NOTE 2: Assign the value which does not exceed the maximum value for jitter buffer set by CMA7 Y=53.
Continued on next page
IPT INITIAL
~
~
IPT INITIAL
~
~
IPT INITIAL
~
~
JULY/01/2006
CMA7
To Next Page
Loading...
