– 630 – NWA-008844-001 Rev.5.0
91ch3007.fm
COMMAND CODE
TITLE:
DTI/CIR/DCH/ICH/BRT/PRT/CCT/CFTC/VIRTUAL AP FUNCTIONS
AA
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
14 Selection of DCH for ISDN-PRI 0
1
PN-24PRTA/PN-30PRTA/
PN-DTA/PN-DTB (Built-in DCH)
PN-SC01 (DCH)
CM05 Y=0: 12
Selection of CCH for CCIS 0
1
PN-24CCTA/PN-30CCTA/
PN-DTA/PN-DTB (Built-in CCH)
PN-SC00 (CCH)
CM05 Y=0: 11
Selection of DTI for T1 interface 0
1
PN-24PRTA/PN-DTA/PN-DTB
PN-24DTA-C
CM05 Y=0: 09
Selection of 8ICH or ILC for ISDN
terminal control channel
[Series 3800]
0
1
ILC (PN-2ILCC)
8ICH (PN-SC03-B)
CM05 Y=0: 13
Providing Virtual AP with control
channel
0
1
Without control channel
With control channel
CM05 Y=4/8
NOTE: This data setting depends on the second data of CM05 Y=4/8.
Set the data as the following combination.
Selection of DCH for Q-SIG
[Series 3200 R6.2 (R6.2)]
0 PN-30PRTA/PN-DTA/PN-DTB
(Built-in DCH)
CM05 Y=0: 36
Continued on next page
INITIAL
INITIAL
INITIAL
INITIAL
INITIAL
CM05 Y=4/8
2ND DATA
CMAA Y=14
2ND DATA
12 1
13 0
INITIAL
JUNE/01/2007
CMAA
To Next Page
Loading...
