– 650 – NWA-008844-001 Rev.5.0
91ch3007.fm
COMMAND CODE
TITLE:
CS/ZT OPERATION DATA ASSIGNMENT
AE
NOTE 1: Assign the same number with the first 4 digits of the Individual PS number set by CM1D
Y=00.
NOTE 2: Be sure to set from the 1st digit to last digit (10 digits). Last 4 digits must be set as “0000”.
NOTE 3: After changing this data, download the PS operation data by CM1D Y=20.
NOTE 4: PS operation data must be downloaded every time the control carrier number is changed.
NOTE 5: Be sure to set the 2nd data to 00 for BS31/BS41 handover.
NOTE 6: This data is set when synchronizing with CS from which SYS-ID is different (CS of the other
company is included).
: Initial Data
Y MEANING
1ST DATA SETTING DATA
DATA MEANING DATA MEANING
19 Handover
[For PHS]
00 Channel slot for
handover (for BS31/
BS41)
NOTE 5
00
NONE
Channel Slot
No. 00
No data
01 Delay correction
when the other type of
CS is used with BS31/
BS41
03
NONE
BS31 and BS21 are
used
Only BS31/BS41 is
used
22 Destination SYS-ID
for priority synchro-
nization NOTE 6
00-09 Wireless Block num-
ber set by CMAD
Y=30
XXXXXXXXX
NONE
Destination SYS-ID
for clock synchroni-
zation
(Maximum 9digits,
Decimal)
No data
42 Network ID for
Roaming Service
[For PCS]
00 Network ID assign-
ment
00000-65534
NONE
Network ID
No data
CSH INITIAL
CSH INITIAL
JUNE/01/2007
CMAE
To Next Page
Loading...
