– 746 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
EA
: Initial Kind (Upper digit)
1: Program address information
2: Receive command information
F: No system initialization information
: Initial Kind (Lower digit)
0 : Power On Initialize
1 : Initialize by Reset Button (SW1)
2 : Serious failure 1
3 : Serious failure 2
4:Not Used
5 : Serious failure 3
6 : Serious failure 4
7 : Serious failure 5
8 : Serious failure 6
9 : SW3 was changed to 0
A: Serious failure 7
B : Initialize by CAT or MAT
C:Not used
D:Not used
E:Not used
F:Not used
: System Initialization information
The address of the program which caused system initialization. This information is output in
the case of system initialization only when the initial kind in is 02, 03, 06, or 0A.
: Communication Failure Kind
00 : Overflow of data sending buffer to FP/AP
01 : Invalid data received from FP/AP
Continued on next page
a
b
c
b
d
CMEA
To Next Page
Loading...
