– 759 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
EA
NOTE: Terminals/cards and available firmware versions that enable to store/display fault informa-
tion are as follows.
NOTE: Fault information store/display is not available for the following D
term
85 (Series i) (IP Bun-
dled Type). But it will be available when the new firmware is installed.
- ITR-8D-2 (BK/WH) TEL (Available when firmware of ITR-8D-3 (BK/WH) TEL is installed)
- ITR-16D-2 (BK/WH) TEL (Available when firmware of ITR-16D-3 (BK/WH) TEL is
installed)
- ITR-8D-2A (BK/WH) TEL (Available when firmware of ITR-8D-3A (BK/WH) TEL is
installed)
- ITR-16D-2A (BK/WH) TEL (Available when firmware of ITR-16D-3A (BK/WH) TEL is
installed)
- ITR-8D-2U (BK/WH) TEL (Available when firmware of ITR-8D-3 (BK/WH) TEL is
installed)
- ITR-16D-2U (BK/WH) TEL (Available when firmware of ITR-16D-3 (BK/WH) TEL is
installed)
Continued on next page
Terminals/Cards
Available: ×
Not available: –
Firmware Version
Terminals D
term
85 (Series i) (IP Adapter Type) × Ver. 2.80 or later
D
term
85 (Series i) (IP Bundled Type)
NOTE
× Ver. 2.80 or later
D
term
IP INASET (ITR-240G-1) × E0 2.80 or later
D
term
SP30 × F Ver. 7.3.0.0 or later
IP-CS × SP-3375 8A or later
D
term
75 (Series E) (IP Adapter Type) –
D
term
IP INASET (ITR-LC-1) –
D
term
SP20 –
Cards PN-8IPLA (IP-PAD) × SC-3386 IPS IPADT PROG-C1 or later
PN-32IPLA/PN-32IPLA-A (IP-PAD) –
PN-8IPTA (SIP) –
PN-IPTB (IPT) –
JUNE/01/2007
CMEA