– 798 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR/CIS/PMS FUNCTIONS (2)
D001
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
11 Printout function of Room Status Information, when the Check Out is
set from Front Desk Terminal
0:
Not available
1: Available
12 Room Status Code set by Check In operation
(
+ Station No. + )
See CMD016>XX06 and CMD031
0:
Invalid
1:
8:
13 Room Status Code set by Check Out operation
( + Station No. + )
See CMD016>XX06 and CMD031
0 : Invalid
1:
8:
14 Type of printout data when Check Out is set to station from Front
Desk Terminal
0 : No printout
1 : Interim (Totaled Bill)
2 : Audit (Totaled Bill)
3 : Interim (Call Record)
4 : Audit (Call Record)
19 Send Message Waiting/Restriction Level/Wake-Up message to PMS 1 : Not available
2 : Available
20 Data Speed for No. 0 Port 0 : Not used
1 : 300 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps
21 Stop Bit Length for No. 0 Port 0 : 1 bit
1 : 1.5 bits
2 : 2 bits
22 Data Length for No. 0 Port 0 : 7 bits
1 : 8 bits
23 Parity for No. 0 Port 0 : No Parity
1: Even Parity
2 : Odd Parity
Continued on next page
CHECK IN
SET
Room Status Code
~
CHECK IN RESET
Room Status Code
~
AP00 INITIAL
AP00 INITIAL
AP00 INITIAL
AP00 INITIAL
CMD001
To Next Page
Loading...
