– 814 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR/CIS/PMS FUNCTIONS (2)
D001
Quick Reference Data Table for SMDR (NEAX 2400 IMS Format)
NOTE 1: For the Port 1 and Port 3, data speed 9600 bps cannot be set.
NOTE 2: The 2nd data=4 is used for either the SMDR or the PMS. If the 2nd data=4 is assigned to the
Port 0 (1st data=80) for the SMDR/PMS, assign the 2nd data=5 to the Port 1 (1st data=100),
the Port 2 (1st data=120) or the Port 3 (1st data=140) for the SMDR.
: Initial Data
1ST DATA
MEANING
2ND
DATA
MEANING
PORT 0 PORT 1 PORT 2 PORT 3
93 113 133 153 Number of times to resend the Selecting
Sequence when NAK is returned in Phase 3
0Not used
94 114 134 154 Number of times to resend the Selecting
Sequence when no answer in Phase 3
0Not used
95 115 135 155 Delay before resending the Selecting
Sequence when NAK is returned
0Not used
96 116 136 156 Delay before resending the text when
WABT is returned
0Not used
98 118 138 158 Guard timer between texts 0 Not used
CMD001
To Next Page
Loading...
