– 819 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR/CIS/PMS FUNCTIONS (2)
D001
Quick Reference Data Table for PMS (IMS Format)
: Initial Data
1ST DATA
MEANING
2ND
DATA
MEANING
PORT 0 PORT 1 PORT 2 PORT 3
20 24 28 32 Data speed 2/3/4/5
NOTE 1
1200/2400/
4800/9600 bps
21 25 29 33 Stop bit length 0 /1/2 1/1.5/2 bits
22 26 30 34 Data length 0 /1 7/8 bits
23 27 31 35 Parity 0 /1/2 None Parity/
Even Parity/
Odd Parity
80 100 120 140 Equipment Type 4
NOTE 2
PMS
81 101 121 141 Priority for data processing 0 1st Priority
82 102 122 142 Message Format 6 PMS Format
83 103 123 143 Number of lines per page 0 Not used
84 104 124 144 Protocol 6 IMS Procedure
85 105 125 145 Station Address (SA) 49 1
86 106 126 146 Unit Address (UA) 33 !
87 107 127 147 Timer for detecting the terminal/no answer 8 1 second
89 109 129 149 Timer for detecting the end of block 70 35 seconds
90 110 130 150 Timer for detecting non data communica-
tion
70 35 seconds
91 111 131 151 Number of times to resend the Selecting
Sequence when NAK is returned in Phase 2
3 3 times
92 112 132 152 Number of times to resend the Selecting
Sequence when no answer in Phase 2
15 15 times
93 113 133 153 Number of times to resend the Selecting
Sequence when NAK is returned in Phase 3
3 3 times
Continued on next page
CMD001
To Next Page
Loading...
