– 829 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
TIME BLOCK ASSIGNMENT (1)/
MAXIMUM NUMBER OF CALL RECORD ASSIGNMENT
D003
DATA TABLE:
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
0
15
H-Method Number 0
H-Method Number 15
0 -65535: Time Block (second)
=0.5 × Setting Data
23 Maximum number of Immediate Printout Call Record for the
Printer which is set to “17” by CMD001>80/100/120/140
NOTE 1: When the data is set to 1-1000, external alarm of
memory overflow is available, if CM44 2nd da-
ta=3003 or CMEA Y=2>28, 38 is assigned.
NOTE 2: Billing memory clear by CMD102 is required.
See PRECAUTION (1), PRECAUTION (2).
0: Not used
1 : 1 call
1000: 1000 calls
24 Maximum number of Call Record for SMDR which is set to “5”
by CMD001>80/100/120/140
NOTE 1: When the data is set to 1-27000, external alarm of
memory overflow is available, if CM44 2nd da-
ta=3002 or CMEA Y=2>28, 38 is assigned.
NOTE 2: Billing memory clear by CMD102 is required.
See PRECAUTION (1), PRECAUTION (2).
0 : No limitation
1 : 1 call
27000: 27000 calls
26 Maximum number of Local office’s Call Record for Centralized
Billing-CCIS.
NOTE 1: When the data is set to 1-27000, external alarm of
memory overflow is available, if CM44 2nd da-
ta=3000 or CMEA Y=2>28, 38 is assigned.
NOTE 2: Billing memory clear by CMD102 is required.
See PRECAUTION (1), PRECAUTION (2).
0 : Not record
1 : 1 call
27000: 27000 calls
Continued on next page
~
~
~
~
~
~
~
~
DECEMBER/02/2005
CMD003
To Next Page
Loading...
