NEC UNIVERGE NEAX 2000 IPS - Page 905

– 881 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
BILLING MEMORY CLEAR FOR PN-AP00-B/
PN-AP00-D WITH MRCA PROGRAM
DD98
(2) “DATA ERROR” is indicated when CMDD98>000: CCC is entered in the following cases.
• The sum of all call records numbers set by CMDD02>0, 1, 2 exceeds the amount of call records
number mentioned in NOTE below.
• System data all clear by CMDD99 is not executed.
ASSIGNMENT PROCEDURE:
NOTE: By entering the 1st data “0000”, the status of the Expansion Memory card (PZ-M537) will
be displayed as shown below.
AP OFF LINE
ST
EXE
++ ++
DD98 CCC
DE
0000
++
DE
Amount of Call Records number of CMDD02 1ST data 0, 1, 2
No EXPMEM on AP00 (PN-AP00-B) is provided
EXPMEM on AP00 (PN-AP00-B)/
AP00 (PN-AP00-D) is provided
CMDD00>3 is set to 0
(Local Office of
Centralized Billing-CCIS/
Stand-alone)
CMDD00>3 is set to 1
(Center Office of
Centralized Billing-CCIS)
CMDD00>3 is set to 0
(Local Office of
Centralized Billing-CCIS/
Stand-alone)
CMDD00>3 is set to 1
(Center Office of
Centralized Billing-CCIS)
2620 1310 23580 22270
JULY/01/2006
CMDD98