Neopost IS-5000 Operator's Manual

Details on Weighing Modes
All weighing options listed below may not be available on your
Mailing System. Check with our Customer Service Centre to discuss
how you can add weighing features to your Mailing System via
E-Services.
Each Weighing Mode has a corresponding icon for quick identification.
•
Dynamic Weighing Weigh all (Dynamic Weighing Module)
Using the Dynamic Weighing Module is the fastest and most efficient method of
weighing and rating mixed mail processed through the Mailing System. It uses a
patented, four-point detection system to weigh and rate mail. It measures the length,
width, thickness and weight to properly determine the mailing format within the mail
class (that is to say letter vs. flat) and rate the mail pieces.
•
Dynamic Weighing,Weigh First Piece (Dynamic Weighing Module)
In this mode, you place a stack of mail on the feed hopper. The Dynamic Weighing
Module will only measure and weigh the first piece and then apply that postage to
entire batch. In this mode, the System will also set the mail class for reporting and
print the impression, that is to say Can Letter, on the envelope.This is the
recommended mode for non-mixed mail processing. As it only validates and rates
the first piece, processing speeds are significantly faster that in the Dynamic Weighing
Mode.
•
Standard Weighing (Weighing Platform) ( )
In this mode, each piece (or stack) of mail is placed on the Weighing Platform.Your
Mailing System measures the weight, applies the weight to the Postage Rate you
have selected and calculates the amount of postage required in a single step. Simply
place your mail into the mail path to print an Impression (or print a Label).
•
Differential Weighing (Weighing Platform) ( )
Differential Weighing speeds up the weighing process and increases your efficiency
by reducing the number of steps required to weigh multiple items placed on a Weighing
Platform. First, sort your mail into stacks and place a stack of mail onto the Weighing
Platform. Next, remove the pieces one by one and put them into the mail path.Your
Mailing System will automatically calculate the postage amount and print the Meter
Impression on each mail piece as it travels down the mail path.
You can use a tray on the Weighing Platform: the Mailing System will ask you to
confirm printing for the last item removed (the tray). To always use the tray, tare the
Weighing Platform (How to tare the Weighing Platform on page 198 ).
•
Differential Weighing Auto-Label (Weighing Platform) ( )
This mode is identical to Differential Weighing Mode except that the system
automatically prints the postage amount on to Labels.
•
Manual Weight Entry (No Weighing) ( )
3
Processing Mail
77
| Page 77 | janv.-12-2012 11:42 |

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English