Newtec Proprietary
Confidentiality: Unrestricted
V1.0
210/314
Feature Descriptions MDM6000 Satellite Modem
Parameter Value Description
Modulator IP
Address
x.x.x.x/xx Enter the MGMT modulator IP Address when the AUPC
controller resides on another device than the MDM6000
(for example the NOP1760).
The IP address is needed to setup IP connectivity between
the controller (for example on the NOP1760) and the
MDM. This to exchange the AUPC messages.
Reference
Terminal
One terminal serves as the reference AUPC terminal in
the network.
This terminal is configured with its terminal ID in the AUPC
controller.
(Refer to the following figure)
For example: use Terminal Id2 as reference terminal.
To Next Page
Loading...
