Oce TDS700 - Page 45

45
The printer operator panel
-Status/action message: indicates the actual status of the printer plus the action
to be taken, e.g. ‘Roll empty. Feed A2, plain paper’.
-Warning message: during a warning message the printer will continue to
operate, but it is possible that the print quality is not optimal, e.g. ‘Fill TDS700
toner’.
-A graphical overview of available rolls and sheet feeders, including the material
type and size used by each roll or sheet feeder.
■ A symbol indicating the paper orientation (for sheet feeders only).
■ An indication that a particular roll or sheet feeder is empty (if applicable). An
empty roll is represented by a dotted roll symbol. An empty sheet feeder is
displayed as an empty paper tray.
■ In the event of an error, a graphical representation of any error location (cover or
panel), together with instructions on how to solve the problem is displayed.
The counter
On the operator panel of the Océ TDS700 printer a counter will be displayed that
gives the user feedback about the progress of the job that is currently being printed.
The counter, which is located at the bottom of the upper window on the operator
panel, displays the number of sets and/or pages printed. Counting starts at 1.
The following options are available.
■ When no sets are made, only the current page and the total number of pages are
displayed (e.g. ‘Page 3 of 5’). At the beginning of a job, when the system does
not know the total number of pages yet, only the current page may be displayed
(e.g. ‘Page 5’).
■ With set input: set counter. In this case the counter shows the current, the total
number of sets and the current page (e.g. ‘Set 3 of 5, Page 10’). At the beginning
of a job, when the system does not know the total number of sets yet, only the
current set and page may be displayed (e.g. ‘Set 2, Page 5’).
■ With set input: multiple sheet counter. In this case the counter shows the current
page, the total number of pages and the current copy, e.g. ‘Page 2 of 12, Copy
5’). At the beginning of a job, when the system does not know the total number
of pages yet, only the current page and copy may be displayed (e.g. ‘Page 2,
Copy 5’).
The keys
With the keys on the operator panel you can make a number of settings for the Océ
TDS700 printer, such as the media type and size or the preferred language.
The following keys are available.